components product information connector new 1/4 mb-0165-1 december 2006 jae pmk div. proprietary. copyright ? 2006 sf9 series plug in sim card connector compatible to gsm 11.11 standard [outline] sf9 series is a tray type connecto r compatible with gsm 11.11 standard plug in sim card for gsm mobile phones. (sim: subscriber identification module) general specification ?tray type connector for gsm 11. 11 standard plug in sim card ? low profile structure, 1.8mm height, 18 .9mm width, 22mm depth (26.5mm when card is inserted) ?two types of mounting, normal and reverse (reverse type now under development) ?connector main body is provided in embo ss (compatible to seco nd reflow), tray provided in tray. ?5 portions of h/d ensures emi/ esd countermeasure and gives consideration to prevention of instantaneous interruption caused by falling. ?retention lock on tray provides click feelin g when mated, and makes positioning easier and also prevents falling of tray. ?no. of contacts: 6pos. ?contact resistance: 100m ohm max. ?dielectric withstanding voltage: ac500vr.m.s 1minute ?operating temperature: -40 deg. c to +90 deg. c rohs compliant ?rated current: 10u a to 1a ?insulation resistance: 1000m ohm min. ?lifetime:5000 times
mb-0165-1 2/4 jae pmk div. proprietary. copyright ? 2006
mb-0165-1 3/4 jae pmk div. proprietary. copyright ? 2006
mb-0165-1 4/4 jae pmk div. proprietary. copyright ? 2006 japan aviation electroni cs industry, limited product marketing division aobadai building, 3-1-19, aobadai, meguro-ku, tokyo 153-8539 phone: +81-3-3780-2787 fax: +81-3-3780-2946 * the specifications in this brochure are subject to change w ithout notice. please contact jae for information. notice: products shown in this leaflet are made for the applications listed below. however, if the above-mentioned prod ucts are to be used in aerospace devices, marine cable-connection devices, atomic power control systems, medical equipment for life-support systems, or any other specific application requiring extremely high reliability, please contact jae for further information. recommended applications : computers, office machines, measuring devices, telecommunication devices (terminals, mobile devices), av devices, household applications, fa devices, etc. note 1. coplanarity should be 0.1mm max. note 2. no pattern and via hole should be located in shaded areas. note 3. no pattern via hole and solder resist in double shaded areas. note 4. no parts located in this area. note 5. applicable slide tray is ?sf9- sts1-a(sj107201) ? assembly is ?jahl-10395". note 6. the thickness of reinforcement board is 0.6 mm min when the product is mounted on fpc. applicable p. c. b. dimension (ref)
|
